Linux version 2.6.24-rc3 (root@t61pee) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #11 SMP PREEMPT Tue Nov 27 20:48:32 EST 2007 Command line: root=/dev/sda2 acpi_osi=Linux BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099800 (usable) BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfeb0000 (usable) BIOS-e820: 00000000bfeb0000 - 00000000bfecc000 (ACPI data) BIOS-e820: 00000000bfecc000 - 00000000bff00000 (ACPI NVS) BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) Entering add_active_range(0, 0, 153) 0 entries of 256 used Entering add_active_range(0, 256, 786096) 1 entries of 256 used Entering add_active_range(0, 1048576, 1294336) 2 entries of 256 used end_pfn_map = 1294336 DMI present. ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) ACPI: XSDT BFEBB79F, 0094 (r1 LENOVO TP-7L 1260 LTP 0) ACPI: FACP BFEBB900, 00F4 (r3 LENOVO TP-7L 1260 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT BFEBBD0C, FEC2 (r1 LENOVO TP-7L 1260 MSFT 3000000) ACPI: FACS BFEE4000, 0040 ACPI: SSDT BFEBBAB4, 0258 (r1 LENOVO TP-7L 1260 MSFT 3000000) ACPI: ECDT BFECBBCE, 0052 (r1 LENOVO TP-7L 1260 LNVO 1) ACPI: TCPA BFECBC20, 0032 (r2 LENOVO TP-7L 1260 LNVO 1) ACPI: APIC BFECBC52, 0068 (r1 LENOVO TP-7L 1260 LNVO 1) ACPI: MCFG BFECBCBA, 003C (r1 LENOVO TP-7L 1260 LNVO 1) ACPI: HPET BFECBCF6, 0038 (r1 LENOVO TP-7L 1260 LNVO 1) ACPI: SLIC BFECBDF0, 0176 (r1 LENOVO TP-7L 1260 LTP 0) ACPI: BOOT BFECBF66, 0028 (r1 LENOVO TP-7L 1260 LTP 1) ACPI: ASF! BFECBF8E, 0072 (r16 LENOVO TP-7L 1260 PTL 1) ACPI: SSDT BFEE271B, 025F (r1 LENOVO TP-7L 1260 INTL 20050513) ACPI: SSDT BFEE297A, 00A6 (r1 LENOVO TP-7L 1260 INTL 20050513) ACPI: SSDT BFEE2A20, 04F7 (r1 LENOVO TP-7L 1260 INTL 20050513) ACPI: SSDT BFEE2F17, 01D8 (r1 LENOVO TP-7L 1260 INTL 20050513) Entering add_active_range(0, 0, 153) 0 entries of 256 used Entering add_active_range(0, 256, 786096) 1 entries of 256 used Entering add_active_range(0, 1048576, 1294336) 2 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1294336 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 153 0: 256 -> 786096 0: 1048576 -> 1294336 On node 0 totalpages: 1031753 DMA zone: 56 pages used for memmap DMA zone: 1930 pages reserved DMA zone: 2007 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767720 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 0000000000099000 - 000000000009a000 swsusp: Registered nosave memory region: 000000000009a000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d6000 swsusp: Registered nosave memory region: 00000000000d6000 - 00000000000d8000 swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000bfeb0000 - 00000000bfecc000 swsusp: Registered nosave memory region: 00000000bfecc000 - 00000000bff00000 swsusp: Registered nosave memory region: 00000000bff00000 - 00000000c0000000 swsusp: Registered nosave memory region: 00000000c0000000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000 swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 29768 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1012127 Kernel command line: root=/dev/sda2 acpi_osi=Linux ACPI: Enabled _OSI(Linux) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 hpet clockevent registered TSC calibrated against HPET Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2393.992 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x5b99000 - 0x9b99000 Memory: 3975720k/5177344k available (3776k kernel code, 151072k reserved, 2797k data, 272k init) Calibrating delay using timer specific routine.. 4794.24 BogoMIPS (lpj=7987594) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12468715 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4789.48 BogoMIPS (lpj=7979971) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff ACPI: EC: EC description table is found, configuring boot EC ACPI: System BIOS is requesting _OSI(Linux) ACPI: If "acpi_osi=Linux" works better, Please send dmidecode to linux-acpi@vger.kernel.org ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved PCI: Failed to allocate mem resource #6:20000@d3000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: d0000000-d2ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: dc100000-df2fffff PREFETCH window: dfd00000-dfdfffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: d4000000-d7dfffff PREFETCH window: dfa00000-dfafffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-5fff MEM window: fc000000-fdffffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:00:1c.3 IO window: 6000-6fff MEM window: d8000000-d9ffffff PREFETCH window: df700000-df7fffff PCI: Bridge: 0000:00:1c.4 IO window: 7000-7fff MEM window: cc000000-cdffffff PREFETCH window: df400000-df4fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 00008000-000080ff IO window: 00008400-000084ff PREFETCH window: f4000000-f7ffffff MEM window: c4000000-c7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 8000-bfff MEM window: f8100000-fbffffff PREFETCH window: f4000000-f7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:15:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 IA-32 Microcode Update Driver: v1.14a fuse init (API version 7.9) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie02] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/virtual/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/virtual/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT BFEE1B32, 0306 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT BFEE1EBD, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3 #11 Call Trace: [] smp_call_function_single+0x61/0xe0 [] _rdmsr_on_cpu+0x4a/0x61 [] rdmsr_on_cpu+0xc/0x11 [] acpi_processor_get_throttling_ptc+0xeb/0x15b [] acpi_processor_get_throttling+0xd/0xf [] acpi_processor_get_throttling_info+0x3b7/0x489 [] acpi_processor_start+0x558/0x630 [] sysfs_find_dirent+0x1c/0x31 [] acpi_start_single_object+0x2a/0x54 [] acpi_device_probe+0x7a/0x8e [] driver_probe_device+0x100/0x18f [] __driver_attach+0x0/0x94 [] __driver_attach+0x5b/0x94 [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x83/0x1cf [] driver_register+0x72/0x76 [] acpi_bus_register_driver+0x3e/0x41 [] acpi_processor_init+0x97/0x105 [] kernel_init+0x175/0x2ed [] finish_task_switch+0x28/0x96 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x88 [] kernel_init+0x0/0x2ed [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3 #11 Call Trace: [] smp_call_function_single+0x61/0xe0 [] _wrmsr_on_cpu+0x47/0x4b [] wrmsr_on_cpu+0xc/0xe [] acpi_processor_set_throttling_ptc+0x104/0x12d [] acpi_processor_set_throttling+0xd/0xf [] acpi_processor_get_throttling_info+0x3d2/0x489 [] acpi_processor_start+0x558/0x630 [] sysfs_find_dirent+0x1c/0x31 [] acpi_start_single_object+0x2a/0x54 [] acpi_device_probe+0x7a/0x8e [] driver_probe_device+0x100/0x18f [] __driver_attach+0x0/0x94 [] __driver_attach+0x5b/0x94 [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x83/0x1cf [] driver_register+0x72/0x76 [] acpi_bus_register_driver+0x3e/0x41 [] acpi_processor_init+0x97/0x105 [] kernel_init+0x175/0x2ed [] finish_task_switch+0x28/0x96 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x88 [] kernel_init+0x0/0x2ed [] child_rip+0x0/0x12 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BFEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT BFEE1E38, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3 #11 Call Trace: [] smp_call_function_single+0x61/0xe0 [] _rdmsr_on_cpu+0x4a/0x61 [] rdmsr_on_cpu+0xc/0x11 [] acpi_processor_get_throttling_ptc+0xeb/0x15b [] acpi_processor_get_throttling+0xd/0xf [] acpi_processor_get_throttling_info+0x3b7/0x489 [] acpi_processor_start+0x558/0x630 [] sysfs_find_dirent+0x1c/0x31 [] acpi_start_single_object+0x2a/0x54 [] acpi_device_probe+0x7a/0x8e [] driver_probe_device+0x100/0x18f [] __driver_attach+0x0/0x94 [] __driver_attach+0x5b/0x94 [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x83/0x1cf [] driver_register+0x72/0x76 [] acpi_bus_register_driver+0x3e/0x41 [] acpi_processor_init+0x97/0x105 [] kernel_init+0x175/0x2ed [] finish_task_switch+0x28/0x96 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x88 [] kernel_init+0x0/0x2ed [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:397 smp_call_function_mask() Pid: 1, comm: swapper Not tainted 2.6.24-rc3 #11 Call Trace: [] smp_call_function_mask+0x43/0x78 [] __rdmsr_on_cpu+0x0/0x10 [] smp_call_function_single+0xa9/0xe0 [] _rdmsr_on_cpu+0x4a/0x61 [] rdmsr_on_cpu+0xc/0x11 [] acpi_processor_get_throttling_ptc+0xeb/0x15b [] acpi_processor_get_throttling+0xd/0xf [] acpi_processor_get_throttling_info+0x3b7/0x489 [] acpi_processor_start+0x558/0x630 [] sysfs_find_dirent+0x1c/0x31 [] acpi_start_single_object+0x2a/0x54 [] acpi_device_probe+0x7a/0x8e [] driver_probe_device+0x100/0x18f [] __driver_attach+0x0/0x94 [] __driver_attach+0x5b/0x94 [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x83/0x1cf [] driver_register+0x72/0x76 [] acpi_bus_register_driver+0x3e/0x41 [] acpi_processor_init+0x97/0x105 [] kernel_init+0x175/0x2ed [] finish_task_switch+0x28/0x96 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x88 [] kernel_init+0x0/0x2ed [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3 #11 Call Trace: [] smp_call_function_single+0x61/0xe0 [] _wrmsr_on_cpu+0x47/0x4b [] wrmsr_on_cpu+0xc/0xe [] acpi_processor_set_throttling_ptc+0x104/0x12d [] acpi_processor_set_throttling+0xd/0xf [] acpi_processor_get_throttling_info+0x3d2/0x489 [] acpi_processor_start+0x558/0x630 [] sysfs_find_dirent+0x1c/0x31 [] acpi_start_single_object+0x2a/0x54 [] acpi_device_probe+0x7a/0x8e [] driver_probe_device+0x100/0x18f [] __driver_attach+0x0/0x94 [] __driver_attach+0x5b/0x94 [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x83/0x1cf [] driver_register+0x72/0x76 [] acpi_bus_register_driver+0x3e/0x41 [] acpi_processor_init+0x97/0x105 [] kernel_init+0x175/0x2ed [] finish_task_switch+0x28/0x96 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x88 [] kernel_init+0x0/0x2ed [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:397 smp_call_function_mask() Pid: 1, comm: swapper Not tainted 2.6.24-rc3 #11 Call Trace: [] smp_call_function_mask+0x43/0x78 [] __wrmsr_on_cpu+0x0/0x10 [] smp_call_function_single+0xa9/0xe0 [] _wrmsr_on_cpu+0x47/0x4b [] wrmsr_on_cpu+0xc/0xe [] acpi_processor_set_throttling_ptc+0x104/0x12d [] acpi_processor_set_throttling+0xd/0xf [] acpi_processor_get_throttling_info+0x3d2/0x489 [] acpi_processor_start+0x558/0x630 [] sysfs_find_dirent+0x1c/0x31 [] acpi_start_single_object+0x2a/0x54 [] acpi_device_probe+0x7a/0x8e [] driver_probe_device+0x100/0x18f [] __driver_attach+0x0/0x94 [] __driver_attach+0x5b/0x94 [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x83/0x1cf [] driver_register+0x72/0x76 [] acpi_bus_register_driver+0x3e/0x41 [] acpi_processor_init+0x97/0x105 [] kernel_init+0x175/0x2ed [] finish_task_switch+0x28/0x96 [] child_rip+0xa/0x12 [] acpi_ds_init_one_object+0x0/0x88 [] kernel_init+0x0/0x2ed [] child_rip+0x0/0x12 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (50 C) ACPI: Thermal Zone [THM1] (50 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 [drm] Initialized drm 1.1.0 20060810 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). tpm_tis 00:0c: 1.2 TPM (device-id 0xFFFF, rev-id 255) RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:37:18:10:8b e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 313 ata2: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226180 irq 313 ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 313 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HITACHI HTS541616J9SA00, SB4IC7UP, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SB4I PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15 ata4.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33 ata4.00: configured for UDMA/33 ata5: port disabled. ignoring. scsi 3:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:15:00.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $ SSFDC read-only Flash Translation layer L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue device id = 2440 device id = 2480 device id = 24c0 device id = 24d0 device id = 25a1 device id = 2670 slram: not enough parameters. block2mtd: version $Revision: 1.30 $ ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 3 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 input: PC Speaker as /devices/platform/pcspkr/input/input4 usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a168783] IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 i2c /dev entries driver ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.1.0 Nov 27 2007 cpuidle: using governor ladder usb 1-4.2: new full speed USB device using ehci_hcd and address 4 usb 1-4.2: configuration #1 chosen from 1 choice cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 Clocksource tsc unstable (delta = -82562130 ns) ALSA device list: #0: HDA Intel at 0xfe220000 irq 17 IPv4 over IPv4 tunneling driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 6 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 272k freed parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)] ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. thinkpad_acpi: ThinkPad ACPI Extras v0.17 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LET56WW (1.26 ), EC 7KHT22WW-1.06 thinkpad_acpi: Lenovo ThinkPad T61p thinkpad_acpi: radio switch found; radios are enabled Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. PCI: Setting latency timer of device 0000:15:00.2 to 64 mmc0: SDHCI at 0xf8101800 irq 18 DMA thinkpad_acpi: standard ACPI backlight interface available, not loading native one... input: ThinkPad Extra Buttons as /devices/virtual/input/input6 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device ftdi_sio 1-4.2:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT232RL usb 1-4.2: FTDI USB Serial Device converter now attached to ttyUSB0 usbcore: registered new interface driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1828 (irq = 17) is a 16550A iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-4965-rs' EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4891784k swap on /dev/sda3. Priority:-1 extents:1 across:4891784k ADDRCONF(NETDEV_UP): wlan0: link is not ready HW CONFIG: channel=1 freq=2412 phymode=2 HW CONFIG: channel=11 freq=2462 phymode=2 wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:13:46:c8:1f:78 wlan0: RX authentication from 00:13:46:c8:1f:78 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:13:46:c8:1f:78 wlan0: RX AssocResp from 00:13:46:c8:1f:78 (capab=0x21 status=0 aid=14) wlan0: associated wlan0: switched to short barker preamble (BSSID=00:13:46:c8:1f:78) phy0: Added STA 00:13:46:c8:1f:78 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready HW CONFIG: channel=11 freq=2462 phymode=2 HW CONFIG: channel=11 freq=2462 phymode=2 wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:13:46:c8:1f:78 wlan0: RX authentication from 00:13:46:c8:1f:78 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:13:46:c8:1f:78 wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:13:46:c8:1f:78 wlan0: association frame received from 00:13:46:c8:1f:78, but not in associate state - ignored wlan0: RX authentication from 00:13:46:c8:1f:78 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:13:46:c8:1f:78 wlan0: RX ReassocResp from 00:13:46:c8:1f:78 (capab=0x21 status=0 aid=14) wlan0: associated wlan0: no IPv6 routers present